i-ACTIVSENSE PERSONALIZATION


id150000001100

Caution
•  The personalization feature may not be set correctly if [Not Adopted.] is selected in the setting displayed on the Mazda modular diagnostic system (M-MDS). Do not select [Not Adopted.] in the setting displayed on the Mazda modular diagnostic system (M-MDS).
Note
•  Settings of some personalization features displayed on the Mazda Modular Diagnostic System (M-MDS) cannot be changed depending on the vehicle specification.
•  A personalization function has been adopted with which settings for each function can be changed.

Smart Brake Support (SBS)


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

Smart Brake Support
The operation of Smart Brake Support (SBS) can be turned off.
ON
ON/OFF
Radar unit
Warning Distance
The distance at which the collision warning activates can be changed..
Near
Near/Far
Radar unit
Volume
The volume of Smart Brake Support (SBS) warning alarm can be changed.
High
High/Low/OFF
Radar unit


Distance Recognition Support System (DRSS)


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

Mode
The operation of distance recognition support system (DRSS) can be turned off.
On
On / Off
Radar unit
Warning Distance
The operation distance for the alert function can be changed.
Near
Far / Middle / Near
Radar unit


Smart City Brake Support (SCBS)


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

Smart City Brake Support
The operation of Smart City Brake Support (SCBS) can be turned off.
ON
ON/OFF
Laser sensor


Lane Departure Warning System (LDWS)


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit

LDWS Timing.
The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.
Late
Adaptive / Early / Medium / Late
Forward sensing camera (FSC)
LDWS Warning.
The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.
Often
Often / Medium / Rare
Forward sensing camera (FSC)
LDWS Sound.
The type of the LDWS warning alarm can be changed.
Beep
Beep / Rumble
Instrument cluster


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

Timing
The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.
Before
Before / At Line
Forward sensing camera (FSC)
Warning
The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.
Low
High / Low
Forward sensing camera (FSC)
Sound
The type of LDWS warning alarm can be changed.
Beep
Beep / Rumble
Instrument cluster
Rumble Strip Volume
The volume of the LDWS warning alarm (Rumble) can be changed.
High
High / Mid / Low
Instrument cluster
Beep Volume
The volume of the LDWS warning alarm (Beep) can be changed.
Low
High / Low
Instrument cluster


Adaptive LED Headlights


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

Adaptive High Beam Control
The adaptive LED headlights can be switched between operable and inoperable.
On
On / Off
Forward sensing camera (FSC)


High Beam Control (HBC) System


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit

High Beam Control.
The high beam control (HBC) system can be switched between operable and inoperable.
ON
OFF / ON
Forward sensing camera (FSC)


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

High Beam Control
The high beam control (HBC) system can be switched between operable and inoperable.
On
On / Off
Forward sensing camera (FSC)


Adaptive Front Lighting System (AFS)


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit

Adaptive Front-lighting System
The adaptive front lighting system (AFS) can be switched between operable and inoperable.
ON
OFF / ON
Adaptive front lighting system (AFS) control module


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

Adaptive Front-lighting System
The adaptive front lighting system (AFS) can be switched between operable and inoperable.
On
On / Off
Adaptive front lighting system (AFS) control module


Blind Spot Monitoring (BSM) System


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit

BSM Volume.
The volume of the blind spot monitoring (BSM) warning alarm can be changed.
High
OFF / Low / High
Instrument cluster


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

Blind Spot Monitoring Volume
The volume of the blind spot monitoring (BSM) warning alarm can be changed.
High
High / Low / OFF
Instrument cluster


Driver Attention Alert System


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

Driver Alert
The driver attention alert system can be switched between operable and inoperable.
On
On / Off
Parking assist unit


Traffic Sign Recognition System (TSR)


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

Traffic Sign Display
The traffic sign recognition system (TSR) can be switched between operable and inoperable.
On
On / Off
Forward sensing camera (FSC)
Speed Limit Alert
The pattern for the excessive speed warning can be changed.
Off
Off/Visual/Audio & Visual
Instrument cluster
Alert Threshold
The warning threshold of the excessive speed warning can be changed.
+0
+0 / +5 / +10
Instrument cluster


360°VIEW MONITOR SYSTEM


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit

Auto display after engine start
Automatically displays the 360°view monitor system when the ignition is switched ON (engine on).
Off
On / Off
360°view monitor controle module
The predicted vehicle track display
The predicted vehicle track display can be switched between display/non-display.
On
On / Off
360°view monitor controle module
Front view Display
The display of the top view/front view while driving the vehicle in the forward direction after reversing can be switched between display/non-display.
On
On / Off
360°view monitor controle module
Reset
The settings for the 360° view monitor system can be reset to the initial values.
No / Yes
360°view monitor controle module