LIGHTING SYSTEM PERSONALIZATION


id091800013300

Caution
•  The personalization feature may not be set correctly if [Not equipped] is selected in the setting displayed on the Mazda Modular Diagnostic System (M-MDS). Do not select [Not equipped] in the setting displayed on the Mazda Modular Diagnostic System (M-MDS).
Note
•  Settings of some personalization features displayed on the Mazda Modular Diagnostic System (M-MDS) cannot be changed depending on the vehicle specification.
•  A personalization feature has been adopted with which settings for each function can be changed.
•  The setting for each function can be switched using the Mazda Modular Diagnostic System (M-MDS) or the center display (with center display). Refer to the [LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.

Auto Light System

Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Auto Headlight On
Auto light sensitivity can be changed.
Standard (All Others)
Extra Low (Except Japan)/Low (All Others)/Standard (All Others)/High (Except Japan)/Extra High (Except Japan)
BCM

Center display

Display of center display

Function

Initial setting

Setting contents

Control module

Auto Headlight On
Auto light sensitivity can be changed.
Medium
Light / Medium Light / Medium / Medium Dark / Dark
BCM

Note
•  If the mode is set to [Extra High (Except Japan)] and [High (Except Japan)], the illuminance level for turning on the headlight LO, TNS (parking lights), and panel light increases. Therefore, each light turns on when the ambient light is brighter than when the level is set to [Standard (All Others)]. In addition, if the mode is set to [Extra Low (Except Japan)] or [Low (All Others)], the illuminance level for turning on the headlight LO, TNS (parking lights), and panel light decreases. Therefore, each light turns on when the ambient light is darker than when the level is set to [Standard (All Others)].
•  The personalization feature may not be set correctly if [Japan Only], such as [Extra High (Japan Only)], is selected. Do not select [Japan Only].
•  The auto light sensitivity setting turns on/off the headlight LO, TNS (parking lights), and panel light according to the following illumination levels.
Note
•  The following illumination levels are a reference. The illumination levels vary depending on the surrounding conditions (weather, reflection off buildings).

Setting contents

Lights on operation

Lights off operation

Panel light On

Panel light On

Panel light On

Panel light Off

TNS (parking lights) Off

TNS (parking lights) On

TNS (parking lights) Off

TNS (parking lights) Off

Headlight LO Off

Headlight LO On

Headlight LO Off

Headlight LO Off

Extra High
1,000 lux
4,000 lux
8,000 lux
2,000 lux
High
850 lux
3,000 lux
6,000 lux
1,700 lux
Standard
700 lux
2,000 lux
4,000 lux
1,400 lux
Low
550 lux
1,000 lux
2,000 lux
1,100 lux
Extra Low
400 lux
500 lux
1,000 lux
800 lux


Turn light system

Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Three-Flash Turn Signal
The operation of the three-flash turn signal function can be disabled.
Off (except for Israel)/
On (for Israel)
Off/On
BCM

Center display

Display of center display

Function

Initial setting

Setting contents

Control module

3-Flash Turn Signal
The turn light system can be switched between operable and inoperable.
On
On / Off
BCM


Coming Home Light System

Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Coming Home Light operation time
The coming home light system operation time can be switched.
30 seconds.
0 seconds./30 seconds./60 seconds./90 seconds./120 seconds.
BCM

Center display

Display of center display

Function

Initial setting

Setting contents

Control module

Coming Home Lights Timer
The coming home light system operation time can be switched.
30 seconds
Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds
BCM


Leaving Home Light System

Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Leaving Home Light system
The leaving home light system can be switched between operable and inoperable.
Off (except European (L.H.D. U.K.) specs.)/
On (European (L.H.D. U.K.) specs.)
Off/On
BCM

Center display

Display of center display

Function

Initial setting

Setting contents

Control module

Leaving Home Lights
The leaving home light system can be switched between operable and inoperable.
Off (except European (L.H.D. U.K.) specs.)/
On (European (L.H.D. U.K.) specs.)
On / Off
BCM

Dimmer switch is operated

Function

Initial setting

Setting contents

Control module

The leaving home light system can be switched between operable and inoperable.
Inoperable (except European (L.H.D. U.K.) specs.)/
Operable (European (L.H.D. U.K.) specs.)
Operable/Inoperable
BCM


Interior Light Control System

Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Interior Lighting Timeout-Door Open
•  The map light illumination time after a door is opened can be changed.
•  The cargo compartment light illumination time after the liftgate is opened can be changed.
30 minutes.
30 minutes./60 minutes./10 minutes.
BCM
Interior Lighting Timeout-Door Closed
The map light illumination time after all doors are closed can be changed.
15 seconds.
15 seconds./7.5 seconds./30 seconds./60 seconds.
BCM

Center display

Display of center display

Function

Initial setting

Setting contents

Control module

Interior Light Timeout - Doors Open
•  The front/rear map light illumination time after any door is opened can be changed.
•  The cargo compartment light illumination time after the liftgate is opened can be changed.
30 minutes
60 minutes / 30 minutes / 10 minutes
BCM
Interior Light Timeout - Doors Closed
The front/rear map light illumination time after all the doors are closed can be changed.
15 seconds
60 seconds / 30 seconds / 15 seconds / 7.5 seconds
BCM


Running Light System (Australian specs.)

Using light switch

Function

Initial setting

Setting contents

Control module

The running light system function can be set.
On (Running light illumination)
Off (Running light non-illumination)/On (Running light illumination)
BCM

Center display

Display of center display

Function

Initial setting

Setting contents

Control module

Daytime Running Lights
The running light system function can be set.
On
On / Off
BCM
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  BCM
•  Forward sensing camera (FSC)
•  Instrument cluster